Why use a pillow mount with an automatic stroker? An automatic stroker does the moving for you, but someone still has to hold it steady. With a device the size of the Keon, that means a hand and a forearm kept busy for the whole session. A pillow mount takes over that job. The stroker is strapped to a shaped foam block that rests on the bed or between your legs, which keeps the angle fixed while you lie back, sit up or kneel. Your hands are free for a phone, a headset or nothing at all.
Kiiroo Keon 1 Multifunctional Pillow: hands-free support
The Keon 1 Multifunctional Pillow is a shaped foam cushion made by Kiiroo to hold the Keon 1 automatic stroker. Rubber and Velcro straps fasten the machine to the pillow, and the pillow then sits where you need it, so the Keon stays pointed the right way without being gripped. The core is PU foam and the cover has a soft velvet-effect finish.
It measures 13 x 15.75 x 5 in and weighs 27.3 oz, large enough to feel stable and light enough to move with one hand. Kiiroo states that it does not fit the Keon 2, so check which Keon you own before ordering.
Best for: Keon 1 owners who want to stop holding the machine during a session, especially with VR or interactive video where both hands are better left free. It is used externally as a support. Without the Keon attached it also works as a plain positioning cushion for couples.
At a glance: Fits Keon 1 only · PU foam core · Velvet-effect cover · 15.75 in wide
Key features
| Strap-in mount |
Rubber and Velcro straps hold the Keon 1 against the pillow so the stroker keeps its angle. |
| Firm PU foam |
The foam block keeps its shape under the weight of the machine instead of sinking flat. |
| Velvet-effect cover |
A soft outer fabric that sits comfortably against bare skin. |
| Two uses |
Works as a Keon 1 mount or, with the machine removed, as a positioning cushion for partnered sex. |
Specifications
-
Fits: Kiiroo Keon 1 (not compatible with Keon 2)
-
Size: 13 x 15.75 x 5 in
-
Weight: 27.3 oz (1.71 lb)
-
Materials: PU foam, rubber and Velcro, velvet-effect cover
In the box
- Multifunctional pillow
- Quickstart guide
How to use
Set the pillow on the bed or sofa and lay the Keon 1 in position. Fasten the straps around the machine until it no longer shifts when you push it. Get into the position you want, then adjust the pillow rather than the Keon to fine-tune the angle. Start the Keon at a slow speed first to check that nothing slips, then carry on as usual.
Care
- Keep lubricant off the cover where you can, and wipe spills away promptly with a damp cloth.
- Kiiroo gives no washing instructions for the cover, so spot clean rather than machine wash.
- Let the pillow dry fully before putting it away.
- Store it flat, with the straps unfastened and untwisted.
Frequently asked questions
Does the pillow fit the Keon 2?
No. Kiiroo lists this pillow for the Keon 1 and states that it is not compatible with the Keon 2. If you own a Keon 2, the Keon Table Clamp is the Kiiroo mount listed for both generations.
Is the Keon included?
No. This listing is the pillow mount only. The Keon 1 automatic stroker and its sleeve are sold separately. The box contains the pillow and a quickstart guide, nothing else.
How is it different from the Keon Table Clamp?
The pillow is soft and sits on a bed or sofa, so it suits lying down and kneeling positions. The table clamp is a steel and ABS bracket that bolts to a hard edge such as a desk, which suits sitting or standing use. The clamp fits both Keon generations, the pillow only the Keon 1.
Free up your hands
Add the Kiiroo Keon 1 Multifunctional Pillow Mount to your cart for plain packaging, privacy-safe billing and a mystery gift in every order.
For adult use only. Read the instruction manual before first use. Specifications are the manufacturer's.
