What does a table clamp add to an automatic stroker? A stroking machine is easiest to enjoy when it stays still and you do not have to brace it. A table clamp is a bracket that grips the edge of a hard surface, such as a desk, and holds the machine out in front of you. Once the bolts are tight, the stroker keeps its position and angle by itself. That makes seated use at a computer practical, and it suits interactive video or VR, where reaching down to steady the device breaks your concentration.
Kiiroo Keon Table Clamp: a fixed mount for desk or table
The Keon Table Clamp is Kiiroo's rigid mount for the Keon automatic stroker. It fastens to the edge of a hard surface and carries the machine, so you can sit, stand or kneel in front of it with both hands free. The bracket is stainless steel and ABS, measures 7.1 x 4.3 x 2 in and weighs 19 oz. Kiiroo lists it for both the Keon 1 and the Keon 2.
Best for: Keon 1 and Keon 2 owners who use the machine at a desk, with a monitor or a VR headset, and want it held firmly in one spot. It is a support bracket, used externally. Anyone who prefers lying on a bed may find a soft mount more comfortable.
At a glance: Fits Keon 1 and Keon 2 · Stainless steel and ABS · 19 oz · Clamps to hard surfaces
Key features
| Clamps to a hard edge |
Tighten the bolts onto a desk or table edge and the mount stays where you put it. |
| Fits both Keon generations |
Kiiroo lists the clamp as compatible with the Keon 1 and the Keon 2. |
| Steel and ABS build |
Stainless steel and ABS parts give the bracket the stiffness to carry a moving machine. |
| Compact bracket |
At 7.1 in tall and 19 oz it stores in a drawer between sessions. |
Specifications
-
Fits: Kiiroo Keon 1 and Keon 2
-
Size: 7.1 x 4.3 x 2 in
-
Weight: 19 oz (1.2 lb)
-
Materials: Stainless steel, ABS
In the box
- Table clamp
- Quickstart guide
How to use
Pick a solid desk or table edge at a height that suits sitting or standing. Slide the clamp over the edge and tighten the bolts by hand until the bracket does not rock. Firm is enough, so avoid forcing them. Clip the Keon into the mount, set the angle, and run the machine slowly for a few strokes to confirm that nothing moves before you start.
Care
- Wipe the clamp with a damp cloth after use and dry it before storing.
- Keep lubricant away from the bolts and the clamping faces so the grip stays firm.
- Check that the bolts are snug before each session.
- Remove the Keon from the mount before cleaning the machine or its sleeve.
Frequently asked questions
Which Keon models does the clamp fit?
Kiiroo lists the Keon Table Clamp as compatible with both the Keon 1 and the Keon 2. That sets it apart from the Keon 1 Multifunctional Pillow, which Kiiroo says does not fit the Keon 2.
Is the Keon included?
No. This listing is for the table clamp only. The Keon automatic stroker and its sleeve are sold separately. The box holds the clamp and a quickstart guide, nothing else.
How thick a table will it grip?
Kiiroo does not publish a maximum table thickness for the clamp, so we cannot give a figure. The bracket itself is 7.1 in tall, 4.3 in wide and 2 in deep. It is meant for a firm, flat edge such as a desk, not a soft or rounded surface.
Mount your Keon
Add the Kiiroo Keon Table Clamp Hands-Free Mount to your cart for plain packaging, privacy-safe billing and a mystery gift in every order.
For adult use only. Read the instruction manual before first use. Specifications are the manufacturer's.
