What does a wand attachment do? A wand massager has a large, rounded head made for external use. An attachment is a silicone cap that stretches over that head and changes its shape. The wand's vibration travels through the attachment, so a toy that could only be used on the outside can now be used internally as well. The Unicorn Head adds a 5.8 inch spiral horn for insertion, while the textured base of the cup rests against the clitoris.
Unicorn Head: a spiral horn for your wand
The Unicorn Head is a wand attachment from Creature Cocks. It adds a spiral unicorn horn with deep ridges to a wand massager, giving 5.8 inches of insertable length. The horn tapers from 1 inch at the tip to 1.8 inches at the bottom, so it starts easy and ends with a fuller stretch.
The silicone is very soft on the surface and firm but flexible underneath. The cup at the base has a 2.1 inch opening that stretches over most standard wand heads, and its textured outer surface gives external stimulation while the horn is inside. The finish is a rainbow colorway. A wand is not included.
Best for: For wand owners who want internal stimulation from the motor they already have. The spiral ridges suit people who enjoy texture, and the gradual taper makes it approachable. You need a standard-size wand massager to use it.
At a glance: 5.8 in insertable · 1 in to 1.8 in taper · Fits most standard wands · 2.1 in cup · Silicone
Key features
| Spiral horn |
Deep spiral ridges along 5.8 insertable inches turn vibration into a rolling texture. |
| Gradual taper |
Widens from 1 inch to 1.8 inches for an easy start and a fuller finish. |
| Textured base |
The outside of the cup stimulates the clitoris while the horn works internally. |
| Stretch cup |
A 2.1 inch opening stretches over most standard wand heads and grips firmly. |
| Soft silicone |
Soft at the surface with a firm, flexible core. |
Specifications
-
Overall length: 7.1 in
-
Insertable length: 5.8 in
-
Narrowest insertable diameter: 1 in
-
Widest insertable diameter: 1.8 in
-
Inner cup diameter: 2.1 in (unstretched)
-
Material: Silicone (phthalate-free)
-
Color: Daydream Rainbow
How to use
Make sure the wand head and the inside of the cup are clean and dry, so the cup grips. Stretch the cup over the wand head and push it down until it sits evenly all the way around. Apply water-based lubricant to the horn. Switch the wand on at its lowest setting, since the attachment concentrates the vibration. Insert the tip and move deeper at your own pace as the horn widens. Angle the wand so the textured base rests against the clitoris.
Care
- Use water-based lubricant only.
- Remove the attachment from the wand before cleaning it.
- Wash with warm water and toy cleaner after each use, including inside the cup and along the spiral.
- Pat dry and store in a cool, dry place away from direct sunlight and apart from other toys.
Frequently asked questions
Will it fit my wand?
The cup opening is 2.1 inches across unstretched and stretches to grip. The distributor says it is compatible with most standard wand massagers. Measure the head of your wand. A head a little wider than 2.1 inches will give a secure fit.
Is a wand included?
No. This is the attachment only. You need your own wand massager to provide the vibration. Without a wand, it can still be used by hand as a non-vibrating toy, although it is designed to be mounted.
Unicorn Head or Tenta Head?
The Unicorn Head is the larger of the two: 5.8 inches insertable, tapering from 1 to 1.8 inches, with spiral ridges. The Tenta Head is 5.2 inches insertable, 0.8 to 1.6 inches, with a sucker texture.
Can it be used anally?
The cup and the wand form a wide end that stays outside the body. If you use it anally, go slowly with plenty of water-based lubricant and wash it thoroughly before any vaginal use.
Upgrade your wand
Add the Creature Cocks Unicorn Head Silicone Wand Attachment to your cart for plain packaging, privacy-safe billing and a mystery gift in every order.
For adult use only. Read the instruction manual before first use. Specifications are the manufacturer's.
