Is a pull handle pump better than a bulb pump? Neither is better. They feel different in the hand. A pull handle pump works like a small syringe: you draw the rod back and each pull removes a set amount of air, so the suction rises in clear, even steps. A bulb is squeezed in the palm and adds suction in smaller, softer amounts. People who want a firm, deliberate action often prefer the pull rod. The Amp Up comes in both styles with the same cylinder.
Amp Up with pull handle: steady, even suction
The Amp Up Penis Pump with Pull Handle pairs a clear, graduated SAN plastic cylinder with a pull-rod hand pump. The pump is 8.2 inches long and shaped to be comfortable to grip. It joins the cylinder through 8.8 inches of tubing, and drawing the rod back removes air to build suction.
The scale on the cylinder shows the effect while you pump. A body-safe silicone sleeve, free of latex, seals the opening against the body, and a quick-release valve lets the pressure go the moment it feels like too much. Inside, the cylinder is 8.8 inches long and 2.3 inches across.
Best for: For men who want a manual pump with a positive, mechanical feel and even control over each stroke. It suits beginners and regular users alike. The pull rod is a good choice if squeezing a bulb repeatedly tires your hand.
At a glance: Ergonomic pull rod · Graduated cylinder · Quick-release valve · Silicone sleeve · 8.8 in inner length
Key features
| Ergonomic pull rod |
Draw the handle back for strong suction in measured, even steps. |
| Graduated cylinder |
The clear, marked cylinder lets you track what is happening as you go. |
| Silicone sleeve |
Body-safe, latex-free silicone seals tightly at the base of the cylinder. |
| Quick-release valve |
Releases the vacuum quickly if the intensity becomes too much. |
Specifications
-
Cylinder total length: 9.5 in
-
Cylinder inner length: 8.8 in
-
Cylinder inner diameter: 2.3 in
-
Cylinder outer diameter: 2.6 in
-
Silicone sleeve opening (unstretched): 0.8 in
-
Tubing length: 8.8 in
-
Pump: 8.2 in x 2.4 in x 1.4 in
-
Cylinder material: SAN plastic
-
Sleeve material: Silicone
-
Pump and tubing material: Plastic
-
Color: Black, clear
In the box
- Graduated cylinder
- Silicone sleeve
- Pull-handle pump with tubing
How to use
Push the silicone sleeve onto the cylinder and connect the tubing to the pull-handle pump. Put water-based lubricant on the sleeve and on yourself. Enter through the sleeve and hold the cylinder flat against the body. Draw the rod back once, slowly, and let it return. Check how the suction feels before pulling again. Build up over several strokes while you watch the scale. Short sessions are enough. When you are done, open the quick-release valve and let the vacuum go fully, then slide the cylinder off. Pain, numbness or dark discoloration means stop.
Care
- Choose a water-based lubricant to protect the silicone sleeve.
- Remove the sleeve and wash it and the cylinder in warm water with mild soap.
- Keep the pump and tubing dry inside. Clean their outsides with a damp cloth.
- Air dry all the parts before you reassemble them.
- Keep the pump in a dry place and avoid knocks to the plastic cylinder.
More on materials in our material safety guide.
Frequently asked questions
What size is the cylinder?
It is 9.5 inches long in total, with an inner length of 8.8 inches, an inner diameter of 2.3 inches and an outer diameter of 2.6 inches. The silicone sleeve has a 0.8 inch opening that stretches as you enter.
How is this different from the Amp Up with bulb?
Only the pump differs. This model uses a pull-rod pump measuring 8.2 by 2.4 by 1.4 inches on 8.8 inches of tubing. The bulb model uses a squeeze bulb on 8.5 inches of tubing. The cylinder, sleeve and valve match.
How do I release the suction?
Use the quick-release valve. It lets air back into the cylinder so the pressure drops straight away. Wait until the vacuum has gone before you take the cylinder off, and do not twist or pull it off while it is sealed.
Is it suitable for a first-time user?
Yes. It is a manual pump, so nothing happens until you pull the rod, and the valve releases the pressure quickly. Start with one or two pulls, keep the suction comfortable, and limit the length of early sessions.
What are the markings on the cylinder for?
The cylinder is graduated, meaning it has a measuring scale along its length. Because the plastic is clear, you can read the scale while you pump and compare one session with another.
Pull, measure, release
Add the Amp Up Penis Pump with Pull Handle to your cart for plain packaging, privacy-safe billing and a mystery gift in every order.
For adult use only. Read the instruction manual before first use. Specifications are the manufacturer's.
