How does an enema bulb work? An enema bulb is the simplest kind of anal douche. It has two parts: a soft bulb that holds the liquid and a slim nozzle that screws into it. You fill the bulb, tighten the nozzle so the joint seals, insert the nozzle and squeeze. There are no hoses, bags or shower fittings to set up. This CleanStream bulb holds 8 oz of liquid and has a nozzle with 2.5 inches of insertable length, so it suits a quick rinse before anal play.
CleanStream Enema Bulb: a quick rinse, no setup
The CleanStream Enema Bulb is a two-piece anal douche made for speed. A red rubber bulb holds 8 oz of liquid, and an ABS plastic nozzle screws into the top to seal it. The bulb is about 4.25 inches long and 9.5 inches around, so it sits comfortably in one hand. The nozzle gives 2.5 inches of insertable length.
Because it has only two parts and no tubing, it is ready as soon as it is filled. It takes up little room in a bag, which makes it handy for travel, and it comes apart for cleaning afterward. The color is red.
Best for: For anyone who wants to rinse before anal play without fitting a shower system or hanging a bag. It is a sensible first enema for beginners because the volume is small and the nozzle is short, and frequent travelers can keep one in a wash bag.
At a glance: Holds 8 oz · 2.5 in nozzle · Rubber bulb · Screw-on nozzle · Travel friendly
Key features
| 8 oz capacity |
Holds enough liquid for a quick rinse in a bulb that fits in one hand. |
| Screw-on nozzle |
The nozzle threads into the bulb and tightens down to seal the joint. |
| 2.5 in insertable nozzle |
A short ABS plastic nozzle keeps things simple and easy to control. |
| No setup |
Fill it, close it and use it, with no hoses or fittings to connect. |
| Easy to pack and clean |
Two small parts separate for washing and travel well. |
Specifications
-
Bulb length: Approx. 4.25 in
-
Bulb circumference: 9.5 in
-
Nozzle insertable length: 2.5 in
-
Capacity: 8 oz
-
Material: Rubber and ABS plastic
-
Color: Red
How to use
Unscrew the nozzle and wash both parts before the first use. Fill the bulb with lukewarm water, then screw the nozzle on tightly so the seal is secure. Put a little water-based lubricant on the nozzle. Over a toilet or in the shower, insert the nozzle gently and squeeze the bulb slowly. Keep the bulb squeezed while you take the nozzle out, so liquid is not drawn back in. Hold the water briefly, then release it. Refill and repeat if you want to, until the water runs clear. Stop if anything hurts.
Care
- Use water-based lubricant on the nozzle.
- Unscrew the nozzle after use and wash both parts with warm water and mild soap.
- Rinse the inside of the bulb several times and squeeze out all the water.
- Let the bulb and nozzle air dry fully, apart, before putting them back together.
- Store in a clean, dry place away from heat and sunlight.
More on materials in our material safety guide.
Frequently asked questions
How much liquid does it hold?
The bulb holds 8 oz. That is a small volume, enough for a quick rinse, and you can refill it as many times as you like. The bulb itself is about 4.25 inches long and 9.5 inches in circumference.
How long is the nozzle?
The nozzle has 2.5 inches of insertable length. It is made of ABS plastic, which is rigid and smooth. Add a little water-based lubricant to the tip and insert it gently rather than pushing.
Is it good for beginners?
Yes. It has two parts, a small 8 oz capacity and a short nozzle, and it needs no setup. That makes it easier to handle than a bag or shower system when you are new to anal douching.
What is it made of?
The bulb is rubber and the nozzle is ABS plastic. The color is red. The distributor does not state whether the rubber is latex-free, so take that into account if you have a latex sensitivity.
Get the enema bulb
Add the CleanStream Enema Bulb with Screw-On Nozzle to your cart for plain packaging, privacy-safe billing and a mystery gift in every order.
For adult use only. Read the instruction manual before first use. Specifications are the manufacturer's.
