How does the clone end up glowing in the dark? The kit includes a glow powder as a third ingredient. After the mold has been taken with the algae-based molding powder, you stir the glow powder into the platinum-cure silicone before pouring. Because the pigment is mixed through the silicone, the whole clone glows, not just a layer on the surface. Stir thoroughly. Pigment that stays in one spot gives a patchy result, with some areas brighter than others.
Clone-A-Willy Glow in the Dark: a replica that lights up
The glow in the dark Clone-A-Willy is a home casting kit from Empire Labs. You take a mold of a penis with algae-based molding powder, then fill the mold with platinum-cure medical-grade silicone that has glow powder stirred into it. The finished clone is glow-in-the-dark pink and has a single-speed vibrator set inside during the cure, so nothing needs assembling afterwards.
Everything is sized around the molding tube, which is 10.8 inches long and 2.5 inches wide. Check the fit before committing. The kit's thermometer is for the water, since its temperature decides how quickly the molding powder firms up. Scissors, a mixing bowl and utensils, a disposable bowl or cup and a cardboard square are not included.
Best for: A playful choice for couples who want a personal replica with a novelty twist, and it works as a gift for an anniversary or time apart. Set aside an unhurried session and follow the instructions closely. Once cured, the clone is used as a vibrating silicone dildo.
At a glance: Glow-in-the-dark pink · Platinum-cure silicone · Single-speed vibrator · Glow powder included · 10.8 in molding tube
Key features
| Glow powder |
Stirred into the silicone before pouring, so the entire clone glows. |
| Algae-based molding powder |
Mixes with water, firms up quickly and records detail down to skin texture. |
| Medical-grade silicone |
100% platinum-cure silicone makes a body-safe clone that holds its shape. |
| Vibrator set in the clone |
The single-speed vibrator goes in during curing, with no assembly later. |
| 10.8 inch molding tube |
The tube is 2.5 inches wide and sets the upper limit on size. |
| Thermometer |
A disposable thermometer helps you control how fast the mold sets. |
Specifications
-
Molding tube length: 10.8 in
-
Molding tube width: 2.5 in
-
Vibration: Single speed
-
Clone material: 100% platinum-cure medical-grade silicone
-
Molding material: Algae-based molding powder
-
Not included: Scissors, mixing bowl and utensils, disposable bowl or cup, cardboard square
-
Lubricant: Water-based only
-
Color: Glow-in-the-dark pink
In the box
- Silicone
- Glow powder
- Molding powder
- Molding tube
- Single-speed vibrator
- Stir stick
- Disposable thermometer
- Instructions
How to use
Start by reading the instructions in the box. Collect scissors, a mixing bowl and utensils, a disposable bowl or cup and a cardboard square, as these are not supplied. Confirm the subject fits within the 10.8 by 2.5 inch tube. Use the thermometer to check the water, then mix in the molding powder and take the mold. Next, stir the glow powder all the way through the silicone so no pigment is left in clumps. Pour the mixture into the mold and set the vibrator in while it cures. Keep to the timings given in the instructions.
Care
- Water-based lubricant only on the finished clone.
- Clean with warm water and toy cleaner after every use.
- Do not boil the clone or run it through a dishwasher, because it holds a vibrator.
- Pat dry after washing.
- Keep it in a cool, dry location away from direct sunlight and separate from other toys.
More on materials in our material safety guide.
Frequently asked questions
Does the whole clone glow or only the surface?
The whole clone. The glow powder is mixed into the silicone before it is poured, so the glow is part of the material and not a coating. Stir it in completely to avoid a patchy finish.
What color is the finished clone?
The distributor lists the color as glow-in-the-dark pink. It is cast in 100% platinum-cure medical-grade silicone, with a single-speed vibrator inside. The pink shade is fixed by the materials in the kit.
Is everything I need in the box?
Almost. The kit holds silicone, glow powder, molding powder, the tube, the vibrator, a stir stick, a disposable thermometer and instructions. You add scissors, a mixing bowl and utensils, a disposable bowl or cup and a cardboard square.
Will it fit a larger penis?
The limit is the molding tube, which measures 10.8 inches long and 2.5 inches wide. The subject must fit inside with space for the molding mix. Measure first, before any powder is mixed.
How does it differ from the skin tone Clone-A-Willy?
Both kits use the same molding powder, tube, silicone type and single-speed vibrator. The glow kit adds one step, stirring glow powder into the silicone, and produces a glow-in-the-dark pink clone instead of a medium skin tone one.
Cast a glowing clone
Add the Clone-A-Willy Glow in the Dark Vibrating Penis Casting Kit to your cart for plain packaging, privacy-safe billing and a mystery gift in every order.
For adult use only. Read the instruction manual before first use. Specifications are the manufacturer's.
