Should I use a stroker with the end cap on or off? It depends on the feel you want. The Double Shot comes with two caps, one for each end, and its tunnel is open on both sides. Leave the cap on the far end and the tunnel has a floor: the distributor notes you can bump against it for a little resistance. Take the cap off and the tunnel is a clear pass-through, which suits longer lengths and makes cleanup simpler because everything rinses straight out.
Double Shot in medium: two entries, one small case
This Double Shot has a vulva at one end and an anal entry at the other, in a medium skin tone. It is a small stroker. The ABS plastic case is 4.4 inches long and 2.7 inches wide and holds a soft TPE sleeve with 4 inches of insertion length. Ridges, bumps and nubs line the canal from one entry to the other.
Because the canal is open at both ends, you can push through it or stop inside. The two caps let you decide. They also seal the stroker when it is packed. Cleaning takes little effort: uncap it, run water through and let it dry.
Best for: A good option for anyone who wants a vulva and an anal entry in a stroker that fits a coat pocket or toiletry bag. It suits home and travel use, alone or with a partner. Useful too for those who want to practice stopping and starting.
At a glance: Medium skin tone · Front and back entries · Textured TPE canal · End caps included · 4.4 in case
Key features
| Flip design |
Turn it over to switch between the vulva and the anal entry. |
| Ridged, nubbed canal |
Texture runs the length of the tunnel for stimulation on every stroke. |
| Pass-through tunnel |
Open ends suit any length and rinse clean quickly. |
| Cap for each end |
Seals the stroker for packing and doubles as an end stop. |
| Soft TPE sleeve |
Stretchy and realistic to the touch. |
| Travel size |
The case is only 4.4 inches long and 2.7 inches wide. |
Specifications
-
Case length: 4.4 in
-
Case width: 2.7 in
-
Insertion length: 4 in
-
Materials: TPE, ABS plastic
-
Color: Medium
In the box
- Double Shot stroker
- 2 end caps
How to use
Uncap the end you plan to enter. Choose whether the other cap stays on as a stop or comes off for a through tunnel. Put water-based lubricant on yourself and add some to the canal. Grip the case and slide in at an easy pace, then speed up as you like. To switch entries, pull out, turn the stroker around and add a little more lubricant. Once finished, pull off both caps and flush the canal with water before washing.
Care
- Only water-based lubricant should be used.
- With both caps removed, rinse through and wash with warm water and mild soap.
- Use a toy cleaner after washing.
- Dry it fully, inside and out, before capping.
- Store it with the caps on, away from heat and damp.
More on materials in our material safety guide.
Frequently asked questions
How long is the tunnel?
The insertion length is 4 inches, inside a case 4.4 inches long and 2.7 inches wide. As the tunnel is open at both ends, anything longer passes through the far side when the cap is off.
Medium or Light: what changes?
Only the skin tone of the TPE. The Medium and Light versions of the Pussy and Ass Double Shot have matching dimensions, entries, texture and caps. Go with the tone you prefer.
Which Double Shot should I get?
There are two entry pairings. This one has a vulva and an anal entry. The other has a vulva and a mouth. Size, material and caps are the same, so it is a matter of which entries you prefer.
Is it good for travel?
The distributor describes it as petite and travel friendly. The case is 4.4 inches long, and the two caps close both ends so it can go in a bag. Make sure it is clean and dry before you pack it.
How do I clean it?
Remove both caps and let water run through the tunnel. Wash with mild soap and warm water, then use a toy cleaner. Let it dry fully before storing, as the distributor advises.
Add the Double Shot
Add the Double Shot Pussy and Ass Stroker, Medium to your cart for plain packaging, privacy-safe billing and a mystery gift in every order.
For adult use only. Read the instruction manual before first use. Specifications are the manufacturer's.
