How do I get a suction cup dildo to stay put while riding it? The surface matters more than the cup. Choose something smooth, hard and non-porous: glazed tile, glass, a sealed wooden chair, the side of a bath. Wipe away dust and any lubricant, moisten the cup lightly and press down from the center so the air is pushed out. Give it a pull to test it. If it lets go mid-session, lubricant has probably reached the base, so wipe both surfaces and set it again.
The Cowboy: a curved 8 inch dildo built to ride
The Cowboy is one of the longer dildos in the Loverboy line. It measures a full 8 inches overall with 6.25 inches insertable and a width of 1.75 inches. The shaft has a gentle curve and was hand sculpted for a realistic look, with a soft, lifelike feel to the surface.
The suction cup base fixes it to smooth surfaces for riding, and it can also be strapped into a harness for use with a partner. It is made of PVC without phthalates, latex, paraffin or fragrance. It has no motor, so it is silent.
Best for: For people who like a longer dildo and a hands-free position on top. The gentle curve suits G-spot or prostate contact. With 6.25 insertable inches it gives more depth than the shorter Loverboy models while keeping a moderate 1.75 inch width.
At a glance: 8 in long · 6.25 in insertable · 1.75 in wide · PVC · Suction cup base
Key features
| Gently curved shaft |
A soft curve along the shaft helps it follow the body and reach sensitive areas. |
| 6.25 insertable inches |
More usable length than the smaller Loverboy dildos. |
| Hand sculpted detail |
Sculpted by hand for a realistic look and soft feel. |
| Suction cup base |
Anchors to smooth, flat surfaces for hands-free riding. |
| Works in a harness |
Can be strapped into a harness for partner play. |
Specifications
-
Length: 8 in
-
Insertable length: 6.25 in
-
Width: 1.75 in
-
Material: PVC
-
Base: Suction cup
-
Color: Beige
How to use
Clean the dildo with mild soap and warm water and dry it. Pick a smooth, hard surface at a comfortable height, such as a tiled floor or a sturdy chair seat. Wet the suction cup slightly and press it down hard, then test it. Coat the shaft with water-based lubricant. Kneel or squat over it and lower yourself gradually, using your legs to control depth. Lean forward or back to change how the curve presses. For partner use, fit it through a harness ring and tighten the straps before adding lubricant.
Care
- Choose water-based lubricant for this PVC dildo.
- Wash with warm water and mild soap after each use.
- Dry it thoroughly, including the underside of the suction cup.
- Store it upright or flat, not touching other toys.
- Do not boil it, and keep it away from direct heat.
More on materials in our material safety guide.
Frequently asked questions
How long is the usable part?
Of the 8 inch total, 6.25 inches is insertable. The remainder is the base and suction cup. The shaft is 1.75 inches wide, the same width as The Pizza Boy and Manny the Fireman.
Is the curve strong?
No. The shaft is described as gently curved. It is enough to favor the front wall or the prostate when you angle it, without forcing a single position. You can also turn the dildo around.
Can it be used with a strap-on harness?
Yes, the maker's description mentions strapping it into a harness for a partner. Use a harness with a ring that suits a 1.75 inch shaft so the base stays seated.
How does The Cowboy compare with Manny the Fireman?
The Cowboy is longer: 8 inches with 6.25 insertable, against 7 inches with 5.5 insertable for Manny. Both are 1.75 inches wide and made of PVC with a suction cup base.
Does it contain latex or phthalates?
No. The distributor lists the PVC as free of phthalates, latex, paraffin and fragrance. As with any PVC toy, use water-based lubricant, wash it after each use and store it apart from other toys.
Saddle up with The Cowboy
Add the Loverboy The Cowboy Realistic Dildo to your cart for plain packaging, privacy-safe billing and a mystery gift in every order.
For adult use only. Read the instruction manual before first use. Specifications are the manufacturer's.
