What do the orbs inside the Tenga Flip Orb do? Most stroker textures are molded from one soft material, so every ridge gives way under pressure. The Flip Orb buries solid balls beneath the soft elastomer lining. The surface you touch is still smooth and yielding, but under it are firm points that do not flatten. As you move, or as you squeeze the pads on the case, those orbs shift and press back, giving a deep, rolling pressure that a single-material sleeve cannot produce.
Tenga Flip Orb: soft sleeve, firm orbs, opens flat to clean
Flip Orb belongs to Tenga's Flip family of hard-cased strokers that hinge open like a book. Inside, solid orbs sit under a layer of soft elastomer, so you feel a cushioned surface with firm pressure points moving beneath it. Pressure pads on both sides of the case let you squeeze: press them and the grip tightens, the orbs push in and the suction grows. The entry is a single seamless opening, which helps hold lubricant in.
The two colors have different interiors. Ocean Blue surrounds its orbs with waves of soft ribs for an entwining feel. Sunset Orange uses spiral edges for a denser, more textured finish. When you are done, pull off the bottom cap, open the case and rinse both halves, then dry it on the cap.
Best for: People who like to control tightness by hand and want deeper, rolling pressure instead of surface texture alone. It is a penetrable sleeve for solo use or for a partner to hold. The flip-open case also makes it a strong choice for anyone who wants easy, thorough cleaning.
At a glance: Firm internal orbs · Squeeze pressure pads · Flip-open cleaning · Reusable · 5.9 in insertion length
Key features
| Embedded orbs |
Solid orbs under the soft lining create firm pressure points that shift as you move. |
| Side pressure pads |
Squeeze the pads to tighten the grip and strengthen the suction when you want it. |
| Seamless hinged entry |
The one-piece opening improves suction and helps keep lubricant inside. |
| Flip-open case |
The body opens flat so both halves of the sleeve can be rinsed directly. |
| Cap doubles as a stand |
Rest the open case on the bottom cap to air-dry. |
| Two interiors |
Ocean Blue has wavy ribs; Sunset Orange has spiral edges. |
Specifications
-
Size: 7 x 3.4 x 2.8 in
-
Weight: 14.4 oz
-
Insertion length: 5.9 in
-
Insertion width: 1.96 in
-
Materials: ABS, PC, elastomer
-
Case: Hard case, flip-open
-
Power: Manual, no batteries
-
Use: Reusable
-
Colors: Sunset Orange, Ocean Blue
In the box
- Tenga Flip Orb with bottom cap (doubles as drying stand)
- Tenga Lotion Regular sample, 0.34 fl oz
How to use
Remove the bottom cap and squeeze the sides to open the case. Spread water-based lubricant over both halves of the sleeve, close it, and add a little around the entry. Slide in, then press the pads on each side to tighten the grip and bring the orbs closer. Ease off to loosen. After use, take off the cap, open the case and wash both halves thoroughly under cold or lukewarm running water. Stand the open case on the cap in a well-ventilated spot. When it is completely dry, close it and put the cap back on.
Care
- Use water-based lubricant only; oil and silicone lubricants can damage the elastomer.
- Wash with cold or lukewarm water and, if needed, mild neutral soap. Do not use alcohol.
- Rinse along the seams where the soft sleeve meets the case, then dry on the cap stand.
- Close and cap it only when both halves are completely dry.
- Store it closed in a cool, dry place.
More on materials in our material safety guide.
Frequently asked questions
What is the difference between Ocean Blue and Sunset Orange?
Both have firm orbs under soft elastomer and the same case. Ocean Blue sets the orbs within wavy ribs, with a bouncy feel toward the end. Sunset Orange has spiral edges and a denser, more textured finish at the end.
How is Flip Orb different from Flip Zero?
Flip Zero relies on closely packed molded details in a single elastomer. Flip Orb adds solid orbs beneath the lining for deeper, rolling pressure. Flip Orb is also lighter, at 14.4 ounces against 17.1, and is closed with a bottom cap instead of slide arms.
How do I open it for cleaning?
Pull the cap off the bottom, then squeeze the sides so the case hinges open. Do not force the two halves apart. Rinse both sides, set the open case on the cap to dry and close it once no moisture is left.
Does it vibrate or need charging?
No. Flip Orb is a manual stroker with no motor or battery. Suction and pressure come from the pads on the case and your own movement, so it is always ready to use.
What size does it fit?
Tenga lists an insertion length of 5.9 inches and an insertion width of 1.96 inches as reference figures. The hard case does not stretch, so the fit is set by the sleeve and it will feel tighter for those with more girth.
Feel the orbs at work
Add the Tenga Flip Orb Flip-Open Reusable Male Masturbator to your cart for plain packaging, privacy-safe billing and a mystery gift in every order.
For adult use only. Read the instruction manual before first use. Specifications are the manufacturer's.
